|
All reports listed here
are in pdf format. Reports that are longer than 12 pages, have been
indexed with bookmarks. When you open the file with Acrobat reader,
please click on the bookmark tab to see a listing of the sections
to assist in navagating the documents.
General Design Studies
KGDS0101: Structural and Thermal
Analysis, Prototype Lens Cell Assembly, 26 pages
KGDSO202: KIRMOS
Flexure Analysis Preliminary Report, 49 pages
KGDS0202A:
KIRMOS Flexure Analysis Preliminary Report, Appendix A, Rear Dewar
Analysis Images, 64 pages
KGDS0202B:
KIRMOS Flexure Analysis Preliminary Report, Appendix B, Internal
Structure Supports, 46 pages
KGDS0202C:
KIRMOS Flexure Analysis Preliminary Report, Appendix C, Internal
Flexure Analysis, 24 pages
KGDS0300: KIRMOS
Guider Preliminary Flexure Analysis, 24 pages
KGDS0400: KIRMOS
Window Heat Load Preliminary Analysis, 9 pages
KGDS0501:KIRMOS Preliminary
Thermal Analysis, 10 pages
KGDS0600: Preliminary
Flexure Analysis of Lens Barrel Assembly Structure, 11 pages
KGDS0700: KIRMOS
Slit Mask Preliminary Thermal Analysis, 7 pages
Test Plans
KTP0100:
Cryogenic Mechanism Prototype Tests, 4 pages
KTP0204:
Sliding Friction Tests, 18 pages
KTP0300,
Adhesive Qualification Tests, 10 pages
Test Reports
KTR0102:
Sliding Friction Tests, 73 pages
KTR0200:
Plastic Impact Tests, 12 pages
KTR0302:
Cryogenic Linear Motion Drive Tests, 20 pages
KTR0400:
Double Window Anti-Condesation Tests and Analysis, 16 pages
KTR0502:
Bearing Tests, 14 pages
KTR0600:
Adhesive Qualification Tests, 14 pages
KTR0700:
Jukebox Latch Prototype, 4 pages
KTR0800:
Cold Contactor Tests and Analysis, 8 pages
KTR0900:
Lens Cell Prototype Tests, 46 pages
KTR0900A:
Appendices to Lens Cell Prototype Tests, 71 pages
|