Call for Proposals Closed
This Material Provided for Reference Only
Note proposals for P60 and P48 time in 2017B are being deferred due to major maintenance
and upgrades to the telescopes and/or their instrumentation. A supplemental call for
time on P60 and P48 may be issued later in semester 2017B.
- Keck I and Keck II, with possible trades for SUBARU time.
- Palomar 200-inch.
Caltech Faculty, Senior Research Associates, Senior Research Fellows,
Post-Doctoral Scholars, Senior Research Staff (approved by the COO Director) and Graduate Students may
apply for COO-administered observing time at Keck and Palomar, subject to the following:
- Applicants must be in residence at Caltech at the time proposals are submitted.
- Caltech Faculty and Senior Research Associates may submit no more than three Keck proposals
and/or any number of Palomar proposals.
- Caltech Senior Research Fellows, Post-Doctoral Scholars and Senior Research Staff may submit any number
of Palomar proposals but are limited to one Keck proposal per semester.
- Caltech Graduate Students may apply for Palomar time only.
3.0 Proposal Format
- Each proposal should cover a single, coherent, well-defined scientific topic.
- Proposals consist of three parts: Cover sheet, Discussion, Observing list.
- A report of your observing history and bibliography (see below) is an essential adjunct to your proposal.
- If you submit two or more Keck proposals, the one representing your highest-priority should be designated
as Principal; all others are Secondary. Similarly, if you submit two or more proposals for the Palomar telescopes,
your highest priority project should be designated as Principal; all others are Secondary.
- New in 2017B: all CIT-COO telescope time proposals are now required to follow a new proposal template
available in either MS Word
of LaTeX form (see also the supporting
3.1 Cover Sheets
Keck: Log into your Keck account at the
Keck Observer Login Page.
Fill in the required information. For guidance regarding the selection of acceptable runs, see the
Palomar: Log into the appropriate Palomar cover sheet
(see links at left) and fill in the required information.
3.2 Discussion & Figures
Using either the MS Word
or LaTeX proposal template,
provide a short (see page limits, below) description of the project, explaining
the scientific goals and methodology, and justifying the observing time and equipment
requested in the present semester. Include citations to publications referenced in the
discussion. New project proposals should present an estimate of the total observing time
required to complete the project; continuing project proposals should summarize the status
of previously obtained data and an updated estimate of the observing time needed to complete
the project. The new proposal template is structured to facilitate proposals responsive to these
requirements; please fill out the template following (and replacing) the embedded instructions.
[Definition: 1 page = One side of a sheet 8½ x 11 inches, with suitable margins.
Type size = 11- or 12-point.]
|Description||Discussion & Figures|
|General Proposals (both Primary and Secondary) ||6 pages plus observing list|
|Palomar - Large Project ||8 pages plus observing list|
3.3 Observing List
Provide a list of targets to be observed, including names, coordinates (in
and apparent magnitudes. Observing lists do not count in the proposal page limit.
3.4 Submitting the Proposal
When finished, combine your cover sheet, discussion and observing list into a single pdf document
(see note below)
and attach it to an e-mail to
not later than
4.0 Observing History and Bibliography
The Director and the Time Allocation Committee place a high premium on the effective use
of telescope time and the timely publication of results derived from the observations.
Accordingly, all proposers are required to submit an Observing History and Bibliography
report as a separate document, distinct from any proposals. Your report should consist of:
Observing History: List the observing time allocated to you for all projects in the last eight semesters
[2013B to 2017A inclusive] and summarize the status of each. Provide:
This report is important for all proposers, but particularly so for applicants who are requesting continuations of
projects previously awarded time by the CIT TAC.
- Telescope and proposal number.
- Instrument(s) used.
- Number of nights allocated and the number of nights useable.
- For ToO projects, give a comprehensive list of the interrupts invoked, including for each the date, telescope,
instrument and duration.
Bibliography: Provide a bibliography of your refereed papers based on Keck (or from observing time awarded
through Keck trades) and/or Palomar data, published or submitted for publication during the last eight
semesters [2013B to 2017A, inclusive], even if you were not the principal investigator of the observing proposal(s).
Attach the report (as a pdf document) to an e-mail to brucato-[at]-astro.caltech.edu
(not later than
5.0 General Notes
- Date-Specific Observing is restricted to projects requiring observations at particular times
(e.g., occultations, transits, critical phase coverage in a binary, etc.). Proposers requesting date-specific
observations must check the Date-Specific box on the proposal cover sheet, and justify the date specificity (i.e. see
the proposal template section 2.5). For each proposed date-specific observation please include the following information:
- Target name
- Type of event to be observed (e.g. transit)
- Date and Time of event/observation (telescope local time, not UT!)
5.1 Special Notes - Keck
- Only a single proposal is needed for a project involving both Keck I and Keck II.
By June 2016 Keck SSC/CARA Board action there are (as of 2017A) policies in place for
Time-Domain Astronomy (TDA)
Partnership Target of Opportunity (ToO)
observation modes. These new policies lead directly to notes 5.1.3 and 5.1.4 below.
- Partial nights (¾, ½, ¼) may be requested at Keck.
Observers should be advised that it may not always be possible to schedule partial night allocations.
- Following 5.1.2 above there are now five observing modes at Keck relevant for CIT proposers:
- "Classical" observing.
- CIT Internal ToO - Target of Opportunity interrupts of Caltech observer (see
CIT TOO page).
- Partnership ToO - Target of Opportunity interrupts when the interrupted observer is from Caltech, University
of California, University of Hawaii or NASA. See
Partnership ToO Policy
- Cadenced observing. See
- Snapshot observing (as a special, single-instance case of Cadence observing).
- For projects involving both Keck and Palomar, submit the Keck and Palomar cover sheets
separately. The discussion and observing list need be attached only to the Keck cover sheet.
- For Keck instrument availability and special considerations see
Keck Instrument Availability.
- KCWI: KCWI will be available for shared risk science beginning in
- SUBARU exchange: The SUBARU-KECK exchange will continue as last
semester with flexibility as to the number of nights available for
exchange. The final number will be determined based on the demand from
each community. Keck will offer LRIS, HIRES, OSIRIS, and MOSFIRE on
Keck-I, and DEIMOS, ESI, NIRSPEC, and NIRC2 on Keck-II. Subaru will
offer FOCAS, HDS, MOIRCS, IRCS (with NGS/LGSAO188 elements), and COMICS
and Hyper Suprime-Cam (HSC). Due to primary mirror recoating, Subaru is
unavailable for use from early October to mid-December.
5.2 Special Notes - Palomar
- Observers may request full or half nights for Hale/P200.
Observers should be advised that it may not always be possible to schedule partial night allocations.
- For projects involving more than one Palomar telescope, submit the appropriate cover sheet for each
separately. The discussion, figures and observing list need be attached to only the cover sheet for the larger telescope.
- For Hale Telescope instruments, see
Palomar Observer Information.
Private and Semi-private
instruments may be requested only with the prior approval of the instrument builder. Please include in the discussion a
confirmation that appropriate arrangements have been made.
- DBSP, LFC, WASP, WIRC and TripleSpec may be operated by remote observing. For additional information, see
- The Oxford SWIFT integral field spectrograph
has been decommissioned for use and will be unavailable in semester 2017B.
- For information on the Palm 3000 system (P3K),
see the P3K Observers information summary.
- At the 200-inch telescope, you may request instruments to be installed simultaneously at the prime
focus and Cassegrain focus but you must fully justify the request in your proposal. Secondary instruments should be
requested only if they are integral to the program and if there is a very high probability that they
will be used during the observing run.
- Proposals for 200-inch time in support of Large Projects may be submitted. See
Proposals for details.
Note on Merging PDF Documents
Combine the cover sheet and discussion section (including the figures
and observing list) of each proposal into a single pdf document.
For information on merging pdf documents, see
PDF File Merging
6.1 Keck Instruments
Keck Telescope instrument information is available through the
WMKO Keck Instrument Home Page.
Supplementary information on instrument status is available at
Keck Instrument Availability
6.2 200-inch Telescope Instruments
Instrumentation for P200 is summarized on the
P200 Instrument Page.
If you propose to bring your own equipment to P200 please specify the
appropriate focus code [Prime Focus (OE-PF), Cassegrain (OE-Cass w/o P3K),
Cassegrain + P3K Base (OE-Cass w/ P3K)] on your cover sheet.
7.1 Specifying Preferred Observing Runs
The system of P's and A's to designate preferred and acceptable runs (respectively), intended to take the guess-work out of scheduling,
rests on two conditions: First, observers need to be as generous as possible in designating acceptable runs, since overly-constrictive
selections make scheduling difficult and, in extreme cases, may even preclude the assignment of observing time to the project. A good
approach would be to tag any observing run as Acceptable if the data can be obtained during that period. Second, the scheduler will
not assign observing time in a run that has not been tagged by the observer with a P or an A. Should circumstances obtain that such
assignment might be needed, the scheduler will discuss the situation with the observer before any exception to the rule is applied.
Putting all the P's and A's on a single line means you want the time scheduled in a single block, if possible. If you want the time
distributed into two or more blocks, use a separate line for each block.
COO Proposal Call 2017B / v 1.0rc6
Last updated: 29 March 2017 RJB/AFB/ACM