6. Components

6.1. Spec sheets, documentation, photos

6.1.1. Optical interfaces

  • Drawing of optical interfaces:

SPECSHEETS/Optical Interfaces v5.pdf

6.1.2. Detectors

  • IFU detector certificate of performance:

SPECSHEETS/2013_02_05_PI_cert.pdf

  • Detectors certificates of performance:

SPECSHEETS/Princeton_Instruments_PIXIS_2048_eXcelon_rev_N5_8.21.2012.pdf

  • Detectors window AR coatings as measured:

SPECSHEETS/Transmission_curves_68042.pdf

  • E2V Spec sheet:

SPECSHEETS/CCD e2V 42-40 BI AIMO.pdf

6.1.3. Fiber repeater

  • USB Fiber Extender:

SPECSHEETS/USB&FW_EXTENDER_REV_F.pdf

6.1.4. Focus stage

  • Focus stage is a Newport SMC100. The spec sheet and user manual are linked below:

SPECSHEETS/SMC100C.pdf

SPECSHEETS/SMC100C-user-manual.pdf

6.1.5. Glass melt data

  • Spectrosil:

SPECSHEETS/Heraeus_SiO2-May-2011.pdf

  • Prism is comprised of a CaF2 (no melt data) negative element, and two glass elements purchased from phoenix optical glass. Their melt data is shown below:

SPECSHEETS/JOB 11554 Glass Data (Prism B & C) 03-06-12.pdf

  • The camera and collimator melt data are linked below:

SPECSHEETS/March 2012 SED Machine Melt Data.pdf

  • The camera and collimator melt glass are summarized below:

SPECSHEETS/March 2012 SED Glass Data.xlsx

  • PBL6Y melt data from Ohara:

SPECSHEETS/12095 CALTECH 334-313 25C PBL6Y.pdf

6.1.6. Lens as-built data

  • Summary of as builts:

SPECSHEETS/SED_Machine_As_Builts-A.xlsx

  • Inspection reports:

SPECSHEETS/sedm_glass_inspections.zip

  • Thorlabs inspection RC5:

SPECSHEETS/SEDM-O-RC2 SEDM-O-RC5.pdf

6.1.7. Lenslet array

  • Lenslet drawing request:

SPECSHEETS/Lenslet Array J_v1.pdf

  • Lenslet drawing from Aµs in Germany:

SPECSHEETS/2APH-Q-P513-R1,820 (34,6x34,6x3).pdf

6.1.8. Shutter data

  • IFU Shutter - CS25 spec sheet:

SPECSHEETS/cs25_9_23_08.pdf

  • RC Shutter - CS45 spec sheet:

SPECSHEETS/cs45-datasheet.pdf

  • Shutter contollers (2) - D880C

SPECSHEETS/d880cdatasheet.pdf

6.1.9. Mechanical Data

  • Aluminum 6061-T6 spec sheet:

SPECSHEETS/Extruded_Alloy_6061.pdf

  • Base plate inspection:

SPECSHEETS/2013_02_05 SED Machine Base plate.pdf

6.1.10. Copper water pump

We use a copper water recirculating system. Note: Use a copper only system, or you will destroy our expensive detectors! If you’re not sure, don’t use the pump.

SPECSHEETS/manual_erm-3k3u_d100eng.pdf

Last updated on 09 November 2017