MAKEE: Object Profile Problems

In the 'profiles-*.ps' PostScript plot plot, you will see a cross section of the spatial profile of the primary object for each echelle order (see profile plots ). (work in progress)

Back to "MAKEE User Guide" main menu...

(April 2008)






In the 'trace-###.ps' PostScript plot you will see a fit to the position of the 'trace' or 'star' file (2nd file on the command line) on the CCD for each echelle order. Example. A straight line connecting the endpoints of the trace has been subtracted from the fit for better visibility. At the top of each plot is RMS of each fit. Generally, this RMS number will be less than about 0.2 pixels. Values larger than 0.5 pixels may indicate problems.

When viewing the trace plot, check that solid line (the polynomial fit) goes through the cloud of points. These points are centroid calculations of the star position on the CCD. On occasion, this solid line will deviate significantly from the data points-- this could indicate a reduction problem. This may only affect one or a few orders, in which case the other orders may still have a good reduction.

Back to "MAKEE User Guide" main menu...

(April 2008)